Advanced Combustion System

A five stainless steel tube combustion system achieves a secondary burn cycle. Not only are you getting energy from the wood, but also from the wood gases which are mixed at the precise ratio of temperature and oxygen. To achieve an extraordinary clean burn without a catalytic combustor, horizontal jets of super heated secondary air are mixed with the fire’s smoke to burn off released smoke particles. You can watch the torch-like secondary flames just below the ceiling during the burn resulting in more heat, cleaner air, fast start up, less chimney maintenance and less trips to the woodpile.

Solid Construction and Automatic Combustion Control

The impressively large 5.0 cubic foot solid built, fully welded and completely lined combustion chamber will give you many years of safe and trouble free performance. The bypass damper and preheated outside air feed directly into the combustion chamber, providing rapid responsiveness and maximum heat control. The thermostat sets the desired heat level for a roaring fire and then shuts down for a long, clean and consistent burn.