 |
 |
 |
|
This product has been discontinued and is no longer available. This page is for informational purposes only.
You spoke, they listened, introducing the newly redesigned Caddy Alterna II Pellet Furnace! Answering the call of homeowners looking for the comfort of a wood-heating system without the inconvenience, and tested to the highest standards set by the EPA and CSA B415.1-10. The Caddy Alterna II is available in both pellet unit or a pellet/electric combination unit to fulfill everyone's needs, pleasing even the most discerning folk looking for an Eco-friendly, efficient heating solution. Thanks to it's 240 lbs hopper capacity, the Caddy Alterna II provides great heating autonomy, and by adding the optional electrical system, it can continue to operate once the pellets have run out. To top that tidbit off, PSG has made certain components maintenance free meaning no need to adjust, calibrate, or oil, and a self-diagnostics electronic interface prevents unnecessary service calls. And of course you can't forget the the self-cleaning bottom feeder that keeps the burn pot free of deposits. Let the Caddy Alterna II show you what the definition of unmatched reliability means, with every component carefully selected and sourced from reputable vendors. With an all stainless steel combustion chamber and burn pot, the heart of your Caddy Alterna II is guaranteed to last. Never be dependent on a single source of energy to bring comfort and safety to your family again.
Appliance Performance
|
Fuel Type
|
Pellet
|
|
Firebox Volume
|
3.6 cu. ft
|
|
Max Burn Time
|
200 hrs
|
|
Heating Area
|
1,000 - 2,500 sq. ft
|
|
Max Heat Input Rate
|
101,000 BTU/hr (29.6 kW) | Overall Heat Output
Rate
|
25,216 BTU/h - 72,447 BTU/h (7.4 kW - 21.2 kW)
|
|
Average Overall
Efficiency
|
67.9% (HHV) 73.2% (LHV)
|
|
Delivered Heat
Output Rate
|
22,537 BTU/h - 64,737 BTU/h (6.6 kW - 19 kW)
|
|
Average Delivered
Efficiency
|
60.5% (HHV) 65% (LHV)
|
|
Optimum Efficiency
|
82.4%
|
| Burn Rate |
1.2 lb/hr - 11.8 lb/hr |
|
Average Electrical
Power
Consumption ...........................................................
|
860 Wh
|
General Features
|
Chimney Diameter
|
4"
|
|
Flue Outlet Diameter
|
4"
|
|
Baffle Type
|
Stainless Steel
|
|
Weight
|
573 lbs (260 kg)
|
|
Blower 1/2 HP 4
speed Direct drive
|
1,650 cfm
|
|
Filters - Dimensions
(W x H x D)
|
16” X 20” X 1” | Air Return Plenum -
Dimensions (Depth or Height)
|
16"
|
|
Air Return Plenum -
Dimensions (Width)
|
21 1/4"
|
|
Hot Air Plenum -
Dimensions (Depth or Height)
|
22"
|
|
Hot Air Plenum -
Dimensions (Width)
|
22"
|
|
Overall Dimensions
(W x D x H)
|
49 1/2” X 29 3/8” X 57 5/8”
|
|
Door Opening
Dimensions (H x W)
|
10" x 13
3/4"
|
|
Glass Surface
Dimensions (W x H)
|
3" x 16"
|
|
Door Type
|
Single, Glass w/
Cast-Iron Frame
|
|
Glass Type
|
Ceramic Glass | Center line of Flue
outlet to the Side
|
13 1/2"
|
|
Center line of Flue
outlet to the Floor
|
26 3/4"
|
|
Electric Element - Location
|
Left or Right
|
|
Electric Element - Recommended (Max Output)
|
15 kW
|
| Electric Element - Other Optional(Max Output) |
20 kW |
| Water Loop Kit - Connecton Location |
Left or Right |
| Water Loop Kit - Connecting Pipe Diameter |
3/4" |
| Water Loop Kit - Back-up Tank Volume |
60 Gal (227L) |
| USA & Canadian Standard Emissions |
EPA / CSA B415.1-10 |
| USA Safety Standards |
UL 391, UL 1995 |
| Canadian Safety Standards |
CSA B366.1, CSA C22.2 no. 236 |
| Warranty |
Limited Lifetime |
Clearance to Combustibles| Front | 48" | | Back Wall | 24" | | Side Wall | 4" | | Opposite Side Wall | 24" | | Recommended Clearance for Maintenance on Option Side ................................................... | 24" | | Ducts Clearance | <5' = 2" ; >5' = 0" |
Diagram for PSG Caddy Alterna II (PF09010)
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
- The Alterna can use : standard wood pellets, sawdust / hay mix pellets, 100% bark pellets, or switch grass pellets
- Input capacity: 101,000 BTU (29.6 kW)
- Loading capacity: up to 240 lbs
- Efficiency : 82.4%
- Exhaust pipe diameter: 4"
- Furnace exterior dimensions: 49 1/2” X 29 3/8” X 57 5/8”
- Hot air plenum dimensions: 22"W x 22"D
- Air return plenum – dimensions (Depth or Height X Width) 16” X 21 1/4”
- G-10 blower with 1/2 hp motor - theoretical 1650 CFM
- Qualifies for the USA tax credit (USA only)
Options
Air Diffuser | 
Auxiliary Discharge System | 
Electric Element | 
Fresh Air Intake Kit | 
Hot Water Loop Kit | 
Insulated Flex Pipe for Fresh Air Intake Kit | 
Leg Assembly for Discharge Tank | 
Orifice for Evaporator Coil
| 
Stand Alone Auxiliary Discharge Tank
| 
Storage Tank Extension | 
Storage Tank w/ Pneumatic
Self Feeding Pellet System | 
TX Valve for Evaporator Coil | 
Uncased Air Conditioning Coil | | |
Old Style Model
|
|
|
|
|
|
|